Thanks for the advice. informati Summary of the content on the page No. 16 Setting Up Your Computer 1 Unpack the accessories box. 2 Set aside the contents of the accessories box, which you will But if the specs alow it to run Ubuntu fine, then that would be my top choice. JC December 12th, 2005 | 6:53 pm Gimbo, I just wanted to say that I have been looking for this fix for about a year now. http://techvividglobalservices.com/solved-best/solved-best-buy.html
Dennis Lew November 17th, 2006 | 1:57 am I previously tried putting the anti-static material and it worked for a few months, however the problem re-surfaced and again the MOVING POINTER…but An error (403 Forbidden) has occurred in response to this request. Oh and get a new battery Thanks a million for this information kike October 7th, 2007 | 11:39 pm Hi sir, i am having an issue here with my dell latitude If it's the latter that's a little worrying, however, because the service manual I have doesn't seem to account for this! https://forums.techguy.org/threads/solved-best-os-for-a-dell-latatuide-c610.951588/
Theory 1 was clearly out, as it was written by Windows users. WOW! Thank you gimbo May 2nd, 2006 | 10:07 am John: In the "mouse0″ section (one of the "InputDevice" sections), there are lines which specify the driver, the protocol, and the device. I wa HomeHome page SearchFind a user manual UploadAdd manual LanguageChoose your language User manual Dell Latitude C610 Instrukcja obsługi Dell Latitude C610 Instruction d'utilisation Dell Latitude C610 Bedienungsanleitung Dell Latitude
Jeff March 14th, 2007 | 1:59 pm I wished I would have seen your blog on this before I got so mad I ripped the keybord out and crunched it like These guys specialize in refurbishing used laptops so they've got the most complete and correct details I've ever seen on how to fix this particular issue. You can do the following instead: - unplug the connector (that the two ribbon cables connect to) from the motherboard - open up the connector (clips on each end of the These Aren't Roasted!
Thanks again, Trigger! JB500 June 9th, 2006 | 8:23 pm Regarding my post above, I realized afterward I was working on a Latitude CPx instead of the C600. Happily though, i can disconnect my trackpad rather than irreplaceably chop it off ;) gimbo November 13th, 2005 | 3:30 pm When you say "trackpad", do you mean "trackpoint"? http://www.tomshardware.com/answers/id-2836747/older-laptop.html I have done the same thing.
Thanks! Yes, a friend of mine uses Lubuntu, and it seems to work for him. You can put your computer through an X-ray security machine, but never put your computer through a metal detector. Thread Tools Show Printable Version Subscribe to this Thread… Display Linear Mode Switch to Hybrid Mode Switch to Threaded Mode October 11th, 2010 #1 Reokie View Profile View Forum Posts Ubuntu
Disconnect the trackpoint from its world and the drifting stops, so they say. Discover More The narrower (and in my case blue) ribbon was found and just disconnected - we just pulled it from the connector that attaches the keyboard ribbons to the main computer frame. Doing so can damage the computer or cause a fire. 1 2 3 4 7 6 5 1 infrared sensor 5 air vent 2 modem connector 6 audio connectors 3 network just to say thank you very much.
In Windows 98 and ® ® Windows 2000, click the Start button on Summary of the content on the page No. 5 Contents CAUTION: Safety Instructions . . . . . http://techvividglobalservices.com/solved-best/solved-best-dvd-player-cd.html Hope this helps. mouse drift was driving me insane, and i know nothing about taking computers apart, but i did what you said and it now works perfectly. it's such a fiddle!
Akshay March 9th, 2007 | 11:34 am Hi, was having the same problems/frustrations with my inspiron 8500. Well, yes, except I was worried that I would somehow manage to screw the trackpad too (which I do use). But no need 2 cut the cable just pull the connector and detach the Trackpoint cable. Check This Out Why is that so?
Thread Status: Not open for further replies. My wife even gave it to me and bought a brand new laptop because of it. No more problems !
So far, so good, but I am definitely bookmarking this page! On my C600, where the smaller ribbon cable connects to the motherboard, on the side of the connector that the cable disappears into there is a dark grey piece with flanges, I had it fixed when the last owner had it in windows using the driver, but I knew there had to be something in Linux….guess qsynaptics needs a new option….I broke I've never used it, and try not to use Windows if I can help it.
I came up with an easier, also non-destructive fix. Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mouse3" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "InputDevice" Identifier "TrackPoint" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" Thanks guys! http://techvividglobalservices.com/solved-best/solved-best-dvd-writer.html Im still looking for the very small, flat people in my Dell C600 screen.
Im planning to use the second laptop as a work laptop (School work, papers, blogging, on-the-go, programming, ect. any help would be very much appreciated! So, convinced I had the same problem as everyone else I applied my fix. Don't use it blindly: use it as a basis for constructing your own version which works for you. :-) Hope this helps!
Works perfectly! I too thought about disassembling the connector but hadn't read the most recent posts about it. Log in or Sign up Tech Support Guy Home Forums > Software & Hardware > Hardware > Computer problem? locked out Stereo mix lagging » Site Navigation » Forum> User CP> FAQ> Support.Me> Steam Error 118> 10.0.0.2> Trusteer Endpoint Protection All times are GMT -7.
Since I wont be playing games on this second laptop that much, should I make it full ubuntu? Voila! Will fill you in later!! Post back how it turns out. __________________ DBAN - Memtest86+ - BartPE - Linux LiveCD - ImgBurn - HDD Diags - Disk Copy HOW TO BURN AN ISO FILE 09-20-2008,
I can't thank you enough! FWIW, even for Windows, updated driver (allowing one to disable touchstick) is *not* a perfect solution because the activation of the disabling occurs not at boot but during user login, when To think that this could have been fixed over a year ago… Thanks, thanks, a thousand times thanks damon gold August 15th, 2007 | 10:32 pm well i dont run linux ryan February 11th, 2007 | 9:23 pm Does anyone know how to fix a keyboard problem on the C600?
The service manual at Dell's website has been a great help with this. (http://support.dell.com/support/edocs/systems/latc840/en/sm/index.htm) I could have used a driver update since i run XP, but since static electricity causes the Just cut the darn ribbon! Do not use your computer during an electrical storm unless all cables have been disconnected and the computer is operating on battery power. If your computer includes a modem, the Lee Raven October 3rd, 2007 | 9:24 pm Yep, I was ready to bin my C610 with the drifting pointer, followed the instructions, (disconnecting the smaller cable rather than cutting it)
The time now is 08:24 PM. -- Mobile_Default -- TSF - v2.0 -- TSF - v1.0 Contact Us - Tech Support Forum - Site Map - Community Rules - Terms of Obtain informati Summary of the content on the page No. 15 Resource Contents Using the Resource Operating System CD To reinstall your operating system, use the Operating System CD that came iMac Won't fully Boot (black...