Home > Hard Drive > Sata Hard Drive Not Detected In Bios Or Setup

Sata Hard Drive Not Detected In Bios Or Setup

Contents

When I restarted the PC the problem had resolved itself with both 2TB HDD working perfectly. And could it be the motherboard? 'Cause it detects SATA 2 just fine, being the DvD player. Kindly get back if there are any further queries. Since the computer cannot boot into Windows XP, the "Device Manager" cannot be accessed and used to install the SATA HDD driver. have a peek here

If the hard drive is getting no +12v power, it won't spin, and the bios cannot detect it. - The bios must be set so that all drive connections are set had to edit this, I never noticed that you have no diskette drive."Your computer case has no floppy drive installed in it, but your mboard has the floppy data header on Sections 1 and 2 pertain only to PC systems.   After verifying that your ATA or SATA port is set to Auto-Detect or is enabled, if you find that your disk drive is not being detected (auto-detected) See More: BIOS does not detect SATA HDD Report • ✔ Best Answer Tubesandwires May 14, 2012 at 21:12:22 The bios not detecting a BOOTABLE hard drive is a separate thing original site

Sata Hard Drive Not Detected In Bios Or Setup

View all 13 comments Report hj13- Jun 14, 2013 at 03:43 AM tnx for the tips, I would try the last tip u have shared.. The hard drive in Vostro 1450 is a FRU (Field Replaceable Unit). To know more about Dell's products, services and drivers & downloads, please go to http://dell.to/YBlak6 Helpful +2 Report Tarun Nov 19, 2014 at 10:23 PM Simple solution for this problem is

If test fails, do reply with the error code (Note: perform complete tests and make a not any errors that appear). 5. To run PSA, press and hold the `Fn' key on the keyboard and then press the power button to start the computer. UDMA cables have color coded connections which require proper orientation when connecting. Hard Disk Not Detected In Bios Laptop We will await your response.

In that case, you need to- go into the bios and find the list of hard drives. Hard Disk Not Detected In Bios How To Recover Data I try press F8 but won't start to the save mode, its restart again and again. praise Christ! Basically, you'll burn a new installation disc with your version of XP and the SATA driver in it so you don't need to press F6.You'll need a utility such as NLite

An error (403 Forbidden) has occurred in response to this request. Bios Detect Hard Drive But Windows Does Not Report • Start a discussion Ask Your QuestionEnter more details...Thousands of users waiting to help!Ask now Weekly Poll Do you think Snapchat stock is a good investment? Motherboard Specifications, P5LP-LE (Leonite)http://h10025.www1.hp.com/ewfrf/wc/...Ewen said..."Sorry... power for one was plugged into the other and the same with the data cables.

Hard Disk Not Detected In Bios How To Recover Data

When you install older versions of Windows on a drive that will be the boot drive (ie, the C: drive), when it comes time to install Windows, the drive may not http://www.tomshardware.com/answers/id-3049589/recognize-hard-drive.html Anyway, if not the motherboard or the drive, could be the power supply. Sata Hard Drive Not Detected In Bios Or Setup I hope this helps others with the same problem. Bios Can't Detect Sata Hard Drive but when I tried ACHI it does not detect my hdd.

If NO, "Load Defaults" by pressing F9 and then F10 to save. 2. navigate here Upgrade An Easy Way to Bigger and Better. I don't even hear the HDD spinning, yet when I hook it up to another PC It's fine. I also try to reseat the HDD to other PC but result the same problem. Hdd Not Detected In Bios Fix

Press and hold the power button for at least 15 seconds to remove the residual power. 3. If the test returns any error contact the manufacturer. However, I recommend running a thorough diagnostics on the hard drive with the diagnostic utility (if any) provided by the manufacturer of your computer. Check This Out Be sure to check your SATA cables are tightly connected to the SATA port connection.The easiest way to test a cable is to replace it with another cable.  If the problem

and sometimes (when hdd is not detected) it shows: system repair cant resolve this issue. Bios Doesn't Detect Hard Drive Laptop What can I do? To know more about Dell's products, services and drivers & downloads, please go to http://dell.to/YBlak6 Please do write back to us.

If the Hard Drive is still not detected reseat the Hard Drive.

That DOES NOT apply to your main chipset. Open the computer cover. 4. Operating Systems ▼ Windows 10 Windows 8 Windows 7 Windows XP See More... How To Check Hard Drive In Bios Windows 7 gabriel smit south africa Report Rob- Nov 14, 2014 at 10:45 AM Laptop sata port or cable not there.

But cannot remove all the data files to the other health HDD. Hdd detectd in bios. Also, refer to the Service Manual for accurate steps and safety instructions. * In case of expired warranty scenario, I would be able to provide limited support, which will not cover this contact form Here are some images of Serial ATA cables.  Click to expand.  The BIOS will not detect a hard disk if the data cable is damaged or the connection is

If you borrow a floppy drive and a floppy data cable from another computer, you can install the SATA drive controller drivers from a prepared floppy disk after pressing F6 near Helpful +2 Report Zohaib R 2402Posts Sunday September 23, 2012Registration date June 16, 2016 Last seen Jun 14, 2013 at 08:56 AM Hi hj13, Please try the steps and post the This will help other users if they have the same problem. Hit F2 on initial startup at Dell Logo and check if the Hard Drive in the "Fixed HDD" field of the "Main" screen.

Register now Not a member yet? If you touch the side of the drive you should feel a slight vibration. Report prabha- Mar 25, 2015 at 09:59 AM i have full formatted the hard disk by aconnceting it with another computer Report kck- Jan 2, 2015 at 06:30 AM my hard when I enter setup (bios) I cant see my hdd.

Helpful +9 Report Zohaib R 2402Posts Sunday September 23, 2012Registration date June 16, 2016 Last seen Mar 7, 2013 at 12:13 PM Hi firewolf123, From your post it seems Hard Drive Folding, crimping, pinching, or creasing data cables can cause the wires to break inside the insulation, leaving the exterior of the cable looking normal. Try these steps and check if this fixes the problem: 1.